Power Panel Main Lug Only

• � Factory Sealed, no external seals required.
• � Fully Wired from Panelboard Enclosure to Terminal Enclosure.
• � External Operating Handles can be padlocked either in the “ON” or “OFF” positions.
• � Spring-loaded Operator Handles allow cover to close with handles in any position.
• � Copper Bus is standard.
• � Isolated Neutral and Ground Bar provided.
• � Available with GFI or EPD Breakers
• � Type 4 Gasketing provided for water and dust-tight seal.
• � Breather and Drain provided for each enclosure.
• � Removable Gland Plates for field installation of conduit entries.
• � Terminal Enclosure has folded lip around the door opening to provide complete and maximum gasket contact, and to prevent
   � liquids from dripping into the enclosure when the door is open.
• � Terminal Enclosure has continuously welded seams ground to a smooth finish.
• � Ample wire bending space allows for easy terminal connection